0
$\begingroup$

I'm trying to design this magazine spring in CAD: enter image description here

But this spring should be skewed:

enter image description here

When designing the spring, there's one problem, one "leg" would need to be longer than the other for the coils to join: enter image description here

Even if the metal could expand and contract a bit it would not be able to do as much.

So my question is what should happen when I skew this type of spring?
Some part of it should contract/distort so that both legs have about the same length.

Improve this question
$\endgroup$

1 Answer 1

Reset to default
1
$\begingroup$

if the connection at the end of the spring is a pin connection and the deformation is small, not a big change in behavior will happen. we still have $$F=Kx$$ But if the connection is fixed and is not aligned with the extension of the spring warping and complex torque change the deformation and stresses.

In car springs they take advantage of this slant and the angle of the saddle to get a variable stiffness, K. The suspension will be soft for small bumps and get tougher for big bumps.

Improve this answer
$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.