# Questions tagged [transfer-function]

The transfer G(s) = X(s) / W(s) function describes the relationship between an input signal X(s) and an output signal W(s).

76 questions
Filter by
Sorted by
Tagged with
65 views

### Fault Recovery of a UAV using MATLAB

I'm currently investigating fault recovery in a UAV using MATLAB. I've been given several variables: phi = the roll angle psi = the yaw/heading angle beta = the side slip p = roll rate r = yaw/...
144 views

### How do I interpret the following Bode, Nyquist and Nichols diagrams?

I am working with an arbitrarily complicated and long-winded transfer function that looks something like this: $$H(s) = \frac{as^4+\cdots+b}{cs^6+\cdots+ds^2}$$ where letters represent constants. ...
37 views

### Z - transform of white noise

I am taking a graduate course in Digital signal processing with no prior knowledge in DSP. So I am struggling because I don't have the foundational knowledge. Please I need help with the following. ...
43 views

### How to model this real-world system to define transfer function for stability?

The system shown is an off-axis drive system that rotates the platform to 60° via a substantially-sized NEMA 34 stepper motor. The axial force required by the stepper/ballscrew assembly has already ...
26 views

60 views

34 views

### Did I get the correct result? Block reduction problem

After solving I got $$T(s) = \frac{s^{2}+3s+3}{(s+1)(s+2)}$$ and for the stability of the system I got: $$s_1 = -1$$ $$s_2 = -2$$ So, is the system stable?
67 views

### Phase shift of transfer function using MATLAB

I'm trying to compute the phase shift of a transfer function (accelerance) in MATLAB, but I'm having issues. The transfer function was computed by dividing the magnitude of the system output by the ...
48 views

### Block reduction need someone to check my work

I tried to solve this block but I am not sure if the end result is any good, some feedback would be nice.
39 views

### Getting the damping ratio from a frequency response function v.s. transfer function

I'm trying to find the damping values of a specimen, based on sweeping the forcing frequency from 0-10 kHz. As shown in the diagram, I measure the input force from the shaker, and the subsequent ...
63 views

44 views

### Designing an RLC circuit with specific transfer function

I have a transfer function below. $H(s)=(s^2+(1/2)s+(1/2))/(s^2+s+1)$ Using this, I have to design an RLC circuit with that transfer function. At first hand, I did some inverse Laplace Transform, ...
36 views

### Design op-amp circuit from transfer function

What is the best way to design a circuit based on the following transfer function: $$T(s)=\frac{9216}{(s^2 + 48s + 9216)}$$
322 views

### How to obtain transfer function of servo?

I am using a servo motor and controlling it via arduino. Servo motor is part of a control system and I have to use System Identification techniques in order to obtain the servo's transfer function. ...
57 views

### How do I get the closed-loop transfer function of the system, fitted with a PID controller, if the input valve has a transfer function?

How do I get the closed-loop transfer function of the system, fitted with a PID controller, if the input valve has a transfer function given by: $\frac{Q(s)}{P(s)} = \frac{Kv}{(Tv*S+I)}$ Where Kv ...
44 views

### How to derive a value from a transfer function

I have a scenario where a valve q_in(t) is pumping water into a tank of height h(t) and area A, which is then pumped out by a second valve q_out(t) that has a resistance to water flow R. I got this ...
49 views

### effect of coupling in MIMO systems

I have a MIMO system with a 2x2 transfer matrix, for example consider: $\begin{pmatrix} \frac{2}{s+1} & \frac{1}{(s+1)(s+2)}\\ \frac{1}{(s+1)(s+2)}&\frac{2}{s+2} \end{pmatrix}$ I would ...
548 views