# Questions tagged [systems-engineering]

Systems Engineering is a multidisciplinary field that combines lifecycle planning and risk analysis with core features of other engineering disciplines. It includes understanding physical systems, organizational planning, computer modeling, and information management. It is also commonly used to describe a position in information technology which involves managing multiple technology stacks and overseeing computer networks.

41 questions
Filter by
Sorted by
Tagged with
0answers
31 views

### Reference book for hydraulic systems design

I'm looking for a good reference book on the topic of fluid dynamics/hydraulics systems engineering. I'd like a reference for simlpe/estimate calculations on things like major losses (pipes), minor ...
0answers
23 views

### Best way to go about “HiPot” testing setup

What is the best way to set up a dielectric strength test? I am planning on using two threaded copper rods for adjustable movement that will receive the voltage. In between the two rods will be the ...
0answers
24 views

### Calculating reliability of a parallel redundant system

I'm trying to calculate the reliability of a system that has proven to be a bit more complicated than I thought. Here is the block diagram for the system: Every single component in this diagram is a ...
1answer
58 views

### What are the drawbacks of inceasing the bandwidth of the system?

I have a doubt concerning the closed loop frequency responce of a control system. Suppose I have the following situation: in which is plotted the frequency response of a system with different ...
1answer
45 views

### Problem finding value of the gain such that the closed loop is stable

I have the following transfer function: $G(s)=\frac{-s^3 +s}{s^4+3s^3+2s^2}$ and this is a transfer function of a plant with two poles in the origin. So I want to desing a controller with two poles ...
1answer
26 views

### Problem with RHP zero in transfer function

I have a transfer function with a RHP zero in $s=+1$, and I am trying to show in Matlab thath this limitation is present. In particular, initially I had a MIMO system, which I decoupled and then I ...
1answer
42 views

### Doubt on bandwidth of a control system

Consider this image of a loop shaping design: here which is the bandwidth of the system? I have a doubt because until now I have considered as bandwidth to the system the one of the complementary ...
1answer
28 views

### Nyquist stability criterion for positive feedback

it is known that the stability of a system with negative feedback may be analized through the Nyquist stability criterion, which is based on observing the number of turns around the point (-1;0) in ...
1answer
38 views

### Doubt on zero pole cancellation

I am looking at a control system which has an unstable pole in the process. The transfer functions of process and controller are the following: ...
0answers
45 views

### Why a zero too close to the imaginary axis gives bad berformances?

I am studying control systems, and I have found that if I consider I control scheme where I filter the reference , if the zero of the pre-filter is too close to the imaginary axis, we have a ...
0answers
47 views

### effect of coupling in MIMO systems

I have a MIMO system with a 2x2 transfer matrix, for example consider: $\begin{pmatrix} \frac{2}{s+1} & \frac{1}{(s+1)(s+2)}\\ \frac{1}{(s+1)(s+2)}&\frac{2}{s+2} \end{pmatrix}$ I would ...
0answers
68 views

### Help with Engineering Mathematics, Struggling to determine coefficients using methods detailed in this research paper

I am struggling with a curve fitting calculation below. the part I am stuck with is arguably the simplest part, which is determining the coefficients $\\K_3$ and $\\K_4$. It seems like it should be ...
1answer
142 views

### How to model projectile motion using dynamical system matrices

I'm trying to figure out how to model projectile motion which can be defined using a simple [quadratic] equation which defines projectile parabola: $$y = y_0 + v_{0y}t - \dfrac{1}{2} gt^2$$ I came ...
2answers
43 views

### What is the engineering way to describe a factory / manufacturing plant system in a formel and mathematical way

I am interested in mathematically describing as well as formalising a manufacturing plant so that other people in the engineering field understand how the system works. I am not from the engineering ...
1answer
46 views

### In what way the object-oriented methodology model an information system? [closed]

Answer briefly how the object-oriented methodology transforms an information system. I really do not know how to answer that question. I know what is an information system ("System capable of ...
1answer
23 views

### What are the necessary qualitative criteria for the existence of limit cycles

The literature on the existence of limit cycles is replete with complex and abstract mathematical analysis. Or for specific systems of specific structure, specific mathematical criteria that determine ...
2answers
101 views

### Frequency Response of a Discrete System

Let's say that I have the following continuous system: $$G(s)= \frac{2}{1+s}$$ I could convert it to a discrete system using for example the Tustin approximation https://en.wikipedia.org/wiki/...
0answers
111 views

### How do I calculate the velocity of the piston?

I have a system with a motor connected to the trapezoidal lead screw. The lead screw is connected to the tube which is connected to the piston. The piston has to pump 1000cc oil against a pressure of ...
0answers
113 views

### How many Technical Rescue: Collapse Units are there in the US? [closed]

In a story about today's Miami bridge collapse, I saw this photo: In the upper left, there is a white box truck which seems to say "MIAMI DADE FIRE RESCUE / TECHNICAL RESCUE / COLLAPSE UNIT," even ...
1answer
201 views

### System Dynamics Modeling

I am trying to model this system but am having difficulties in setting up the equations of motion. This is a simplified model of a motorcycle suspension system, where P is the ground in the image ...
1answer
109 views

2answers
704 views

### Is there a term for a circular dependency in system design and engineering

Is there a term used in systems engineering that describes a situation in which the design of one subsystem (call it "A") affects the the requirements for another subsystem (call it "B") while at the ...
1answer
572 views

### Simulation of First Order System (Matlab & Simulink)

Yesterday, I tried to find constants $k_1$ and $k_2$ for the following system: $$\frac{\mathrm d RH}{\mathrm dt}=k_1+k_2(RH_{ext}-RH).$$ Now, I have some first computations for $k_1$ and $k_2$ and ...
1answer
220 views

### Parameter Estimation for First Order System

I would like to get a simple estimation of the parameters for a humidity chamber system. The humidity chamber has one constant inflow ($k_1$) and and outflow which depends on the humidity of a ...
5answers
3k views

### Is systems engineer an IT profession or an interdisciplinary field of engineering?

The term Systems Engineer has always interested me as it generally involves many different fields of engineering. Systems Engineer - Interdisciplinary The definition I'm familiar with is usually ...