Questions tagged [mechanical]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
1
vote
2answers
37 views

Looking for locking “lanyard” reel mechanism

I'm working on a system that requires a small cord (~3ft long) to retract up into a reel and lock in place so it cannot be pulled away from the reel. Sort of like a seatbelt mechanism after it's been ...
0
votes
0answers
28 views

Number of Kinematic Pairs

Kinematic pairs are the connection between 2 links that can have relative motion between them. But In six bar chain as shown below: There are five pairs for them to be a kinematic chain. But if I ...
0
votes
2answers
69 views

How can a mechanical pocket watch wind itself from movement, and does it really get damaged if wound “too much”?

Today I received the mechanical pocket watch that I had recently ordered. It was this one: https://www.trendhim.se/guldfargat-mekaniskt-retro-fickur-p.html#full-gallery I find it extremely fascinating ...
2
votes
3answers
75 views

What is this mechanical pump called?

I am unable to find it again but I once heard of a type of air pump that involved a pair of offset archimedes screws inside a cylinder. The point of the device was that as the screws would turn ...
0
votes
1answer
35 views

Peltier Module Set up isn't cooling

I have set up a peltier module with an aluminium heat sink, cooling fan, 12v, 7ah battery supply and thermal paste for the purpose of cooling water. At first, it performed well. It dropped down to 3.5°...
1
vote
2answers
64 views

Professional threaded insert in plastic?

I'm getting some plastic parts (made with HDPE) CNC machined. A few of these parts require the addition of threaded inserts. I've printed the parts myself using a 3d printer and when I add the ...
0
votes
1answer
29 views

Shape of the shaft of knurling device

I'm trying to design and simulate a simple knurling device. The shaft ( blue part ) has a flat surface at the other end, where the small grey pin connect the green body to the shaft. I guess you can ...
0
votes
0answers
43 views

Design a Jig and Fixture for 3-axis CNC Milling Machine

Newbie Here!!! This is my assignment task. I am required to design a Jig and Fixture for 3-axis CNC Milling Machine. The workpiece will be a simple aluminium block and it will be cut and shaped into a ...
0
votes
2answers
52 views

how many power stroke in 3 cylinders, 4 stroke at 3000 rpm?

According to some answers, in 3 cylinder , 4 stroke we have power stroke each 240°, as we have 1500 rev. Of 720° in this rpm, so we will have this: 1500 x 1.5 = 2250 power stroke at 3000 rpm, is it ...
0
votes
1answer
38 views

What is this object?

In framing the question, I can't be more specific as I have no idea (though a suspicion) about what this came from. I have a number of them that are several different diameters from 125mm to about ...
0
votes
0answers
24 views

Way to keep object on linear rail in the position you leave it in despite smaller external forces?

Problem: I have a rod on a linear rail system. This rod can be pushed forward or backwards. There is air blowing out of the front of the rod (~2 lbf) causing it to move to the back position by default....
0
votes
1answer
32 views

Identify bearing dimensions from its bearing number

In motors/pumps generally following bearings are used (ref: https://www.nke.at/en/bearings-applications/applications/electrical-motors): Deep groove ball bearings Cylindrical roller bearings Angular ...
0
votes
0answers
10 views

Reloading Press Powder Dispenser Pressure

Yesterday my Lee powder dispenser to my reloading press popped off gunpowder everywhere I had removed the top part of the container off and placed it back on, there is a "on" / "off&...
0
votes
1answer
53 views

Motor sizing for modelling

Im working on a headrest for a car that will electrically adjust up and down and have drawn up my plans. it now comes to the important questions, such as what motor to use. Ive been looking at motor ...
0
votes
2answers
192 views

Heat transfer Calculation, for Cooling for an aluminium box

To go into more detail, I basically have a controller and its housing is basically an aluminium box that I need to add heat sinks to. But first I need to calculate how much heat is being dissipated by ...
0
votes
0answers
26 views

Tiny sliding mechanism

I have been trying to build a sliding keyboard phone attachment for a while now, but can't seem to get anywhere. Basically, I want to combine my Moto Z Play with this cheap, generic bluetooth keyboard....
0
votes
2answers
49 views

Do you know any mechanism that can pass a thread through several holes?

Well i am stuck trying to figure out this problem, actulally i see a machine that can make it with a torus, a torus coilling machine. But that not work with a multi turus shape. I want to automate ...
0
votes
0answers
30 views

ABAQUS: How to connect a shell edge with a shell face?

I'm performing a buckling analysis of a stiffened aluminium panel. The panel and flatbar stiffener(2) is created as one 3D shell extrusion. The T-stiffener (1) is another 3D shell extrusion. How do I ...
0
votes
1answer
35 views

Specifications of Tensile Test Specimen?

I am Currently Working on Measuring Various Mechanical Properties of Metalic Materials using Universal Testing Machine (UTM) at Various Temperatures. I know that for Testing at Ambient Conditions, ...
1
vote
0answers
25 views

High articulation joints

Looking for advice or suggestions for high articulation joints (>57°) for an automotive halfshaft. Peak operating conditions are in the ballpark of ~1000RPM, ~300ft-lb torque. I've considered u-...
1
vote
0answers
39 views

Latch design for home exercise equipment [closed]

I have a latch design problem and need your help - many years in software engineering aren't helping me much here! Two pieces of 60x30mm RHS become parallel/adjacent (on the 60mm face), with a 5mm gap,...
1
vote
0answers
38 views

How can you convert 180 rotation into two separate motions?

I have a small servo that can rotate 180 degrees. I would like to get two different connected parts to move at different times, one part moving while the servo is between 0-90 degrees, the other part ...
1
vote
1answer
62 views

Bending moment when there are no constraints

I faced this problem in an old book (Hall Allen S., Theory and Problems of Machine Design; 1961) The answer according to the book is 592 [in.lb], but I think the bending moment should be 0 because ...
1
vote
2answers
59 views

Most efficient orientation of exhaust vents on top plate of chassis for air flow with regard to heatsink fins?

I'm looking for some advice from an ME or anyone who understands heat transfer,convection, etc. I'm currently laying out in Inkscape a top panel for an audio amplifier I'm building. Now, my question ...
1
vote
1answer
26 views

Arrow on Activity (AOA) Network Diagram

I have question-related to industrial management, actually, it is a problem on arrow on activity network diagram. I tried to solve the question my self, below are the images. If I did any mistake ...
2
votes
0answers
71 views

How is motor torque related to capstan equation?

I know that capstan equation relates $T_{in}$ and $T_{out}$ as $T_{out} = T_{in}e^{u \cdot F_c}$, where $u$ is friction coefficient and $F_c$ is wrap (slip) angle. In my situation, the capstan is ...
2
votes
1answer
51 views

Is there a way to convert a short throw in one direction into a long throw in two directions

I have a motor that I have created a simple adapter for; this lets us attach any parts we might design to solve the final problem: I would like to convert the motors motion to oscillating motion in ...
-1
votes
1answer
30 views

Can we coat brass with nickel by peen (mechanical) plating?

Is it possible to plate brass conductor with aluminum by peen plating?
2
votes
0answers
14 views

Is inverse hall-petch relation valid crystals larger than nanocrystalline?

The image shown here is of ceramics, where they varied the grain size and measured the strength. For example, let's take Al2O3. There we observed that strength first increased from 3 μm to 95 μm. But ...
0
votes
0answers
66 views

Making a machine to sort out old bolts, washers, nuts etc in workshop

I spend a lot of time in my workshop sorting out and putting back into their boxes bunches of screws, washers, nuts and other assorted niknaks and I want to make a machine to take this chore off my ...
1
vote
1answer
101 views

Calculate Torque Required

I am working on a school project that requires me to build a machine. I have designed the machine but I am stuck at torque calculation. The problem goes like this, the machine supposes to rotate a ...
0
votes
2answers
71 views

Regarding design of a compressed air delivery system based on a screw air compressor

I want to select a screw compressor for my application wherein I need a pressure of about 18 psig, and 300 cfm at the aforementioned pressure. The compressors I'm finding suitable for the system have ...
1
vote
1answer
26 views

What are the characteristics of a motor that will generate current and is powered by a 30 cc, 2-stroke small engine?

Problem: I am trying to hobby-build a generator using a (old, working, throw-away gas, yard blower) 30 cc, 2-stroke engine. The 2-stroke engine will spin a motor and I want the motor to generate DC ...
0
votes
1answer
70 views

Airsoft BB Funnel Design - Electric funnel jam solution?

I'm working on a design to feed Airsoft BB's through a funnel. A simple gravity fed system (ie. I don't want to force them out at speed) but every now and again the BB's get jammed at the end of the ...
-1
votes
1answer
257 views

Eulerian and Lagrangian --configuration— (continuum mechanics)

This is in continuation/related to the following question asked in the below link Eulerian and Lagrangian descriptions of velocity According to my understanding Lagrangian approach is an approach ...
1
vote
5answers
297 views

What is a purpose of learning G-code?

I might be wrong here. The solid modeling done in CAD like Catia, NX, Solidworks,etc can be taken as input in CNC and the desired shape and size of piece can be obtained.The CAD itself convert the ...
1
vote
0answers
37 views

RSS Tolerance calculation and usage

From my experience, I've been calculating RSS tolerances by squaring all relevant tolerances, summing them up and then square rooting the sums... ie: RSS=[Σ(tol^2)]^0.5 I've also heard of other ...
1
vote
0answers
47 views

Tolerance Analysis on clearance holes

I am designing an enclosure that holds a lens (clearance fit) and a photodiode on a PCB. The alignment of the photodiode to the lens must be pretty tight, thus I am using a boss on the enclosure (also ...
1
vote
1answer
62 views

What kind of magnetic water conditioner can industrial sinter plant use?

As you can see in the below shematic, the magnetic water conditioners can be used for the pipes of incoming process water on sinter plants to reduce surface tension of water and get fuel consumption ...
1
vote
1answer
108 views

Hydraulic Brakes - Why motorcycle brakes more powerful than bicycle brakes?

I was wondering why motorcycle brakes have so much more stopping power than bicycle hydraulic brakes (Than can be found on mountain bikes for example). The rotor has a bigger size which gives better ...
-1
votes
1answer
47 views

Design suggestions for Mechanical rotating disc with 30 degrees step

I am a software engineer with no knowledge of mechanical engineering. I need to buy or build a rotating disc which can rotate in 30 degree steps only i.e each time I try to rotate it, it should take ...
1
vote
1answer
43 views

calculation of tension in curved chain for chain fountain (Mould effect)

https://royalsocietypublishing.org/doi/10.1098/rspa.2013.0689 A chain of some sort goes upwards, turns in a half circle (according to the drawn diagram), and goes back down. Focusing on the half ...
1
vote
3answers
45 views

what to learn to design mechatronics device that move [closed]

I want to design an artificial leg for disabled people. The idea is design of a Device for patients with problems on one side of the leg from the knee down. This device first detects intent to move ...
1
vote
1answer
27 views

How to constrain stepper motor inside case?

I have a stepper motor linear actuator assembly like this for example, but the stepper shaft seems able to move axially back and forth - hence when I change direction it has to do a few rotations, ...
1
vote
0answers
46 views

I need a mechanism/method to control a shaft that can rotate at different speeds. (faster clockwise and slower anti-clockwise)

I need to develop a mechanism - Where in I have a shaft that needs to rotate at different speeds. Lets say at a higher RPM clockwise and a lower RPM anti-clockwise. This shaft is attached to my ...
1
vote
0answers
152 views

Electronic Pressure Control, EPC

In short, the question is: How the EPC affects an automatic transmission? I'm planning to build an automatic transmission controller module, TCM for 4F27E Ford transmission. So far I haven't found an ...
2
votes
1answer
105 views

Latch Mechanics

I want to make a sprung latch mechanism which keeps a door in place until a certain force is applied to the door. In the diagram attached, the force the door must release at is Fd, and the latch ...
-2
votes
1answer
291 views

Internal involute spline 1.375 - 21T

could anybody help me by providing an internal involute spline data sheet similar to the attached picture for an 1-3/8" splined shaft with 21 teeth, 16DP and 30 degree pressure angle. Thanks for your ...
0
votes
2answers
41 views

Position vector to Velocity vector

Is it possible to derive velocity vector form position vector without unknown such as: position vector of A = (0.8)i + (1.2)j?
0
votes
1answer
64 views

How do I change the coordinate system from x-y to n-t or r-theta by using Matrix? [closed]

How do I change the coordinate system from two dimensional cartesian to two dimensional curve linear and polar by using Matrix?