# Questions tagged [bending]

The tag has no usage guidance.

30 questions
Filter by
Sorted by
Tagged with
56 views

### How to calculate the deflection displacement of a circular looped, closed bending beam?

There is a given ring A, with a given cross section B. Ring A is placed on Columns C. The number of the columns is a variable, but minimum three. The linear distance X between two columns can be ...
47 views

### Maximum shear in a beam

Engineering books and lectures typically make two things clear: Maximum bending stresses (normal) develop at the beam surfaces, that is, at the greatest distance from the neutral axis. Shear stresses ...
22 views

### Modeling the Internal Forces Exerted on a Catapult Arm while Throwing

I am currently creating a MATLAB script to determine the internal forces present in a uniform beam as it is accelerated by a torsional spring. I was able to derive the equation for the axial force ...
33 views

### Why can't I-beam resist torsion but can resist shear stress due to transverse loading?

It is already known that the I-beam is very bending resistant (causes less deflection for the same transverse load and also results in lesser stresses relatively). But for an eccentric transverse load ...
51 views

### Which force generates the reaction moment in a fixed support

The question is: Which force causes the reaction moment at a fixed joint ? Lets consider a very simple example, a beam with one end connected by a fixed support to a wall. I understand that at A, ...
268 views

### Is bending moment along a beam independent of the cross sectional area of the beam?

We know this that if the a cantilever beam (of any cross section) is fixed at one end and a transverse force is applied on the other, then it will bend. However, we just casually assume that the ...
53 views

### Metal sheet forming - material properties when switching material

What does one have to look out in material properties when changing material grade in cold sheet forming operation (example: from DC04 to DC03 or to DC01). Operation is mostly made of 90°bends and ...
31 views

### Does the Superposition principle actually make sense in reality for a rod subjected to bending and axial force togehter?

Consider a rectangular rod, for example. I fix it from one end and apply a transverse force on the other (to cause bending) and also a axial force (lets just assume its compressive). Now, according to ...
61 views

### Shear and Bending Moment

A square tube is slid into a larger square tube. If a load is applied to the end of the inner tube, I would think that inner tube would mainly contact the outer tube in two locations as the load is ...
40 views

### Find the maximum stress at a point in a machine member

A machine member having a diameter of 50 mm and a length of 250 mm is supported at one end as a cantilever subjected to different forces as shown in the figure. Find the maximum stress at points A and ...
253 views

### Why do we always need to calculate the 'Moment of Inertia' about neutral axis for bending?

I was having a look at the bending stress derivation in few of the books. The derivation indicates how each of the element in the bending stress equation is derived into that equation. However, for ...
37 views

### Unusual bending moment at simply supported beam in etabs [closed]

The horizontal beam is simply supported. I have assigned pinned to released the moment at the both ends. However, there's moment spike near the end in ETABS, what's the problem ? I have checked thru ...
735 views

### What are the units used in beam bending equations? Do they matter?

I was just wondering whether or not the standard beam bending equations worked for all units. E.g. imperial and metric etc. From what I'm guessing it shouldn't really, since once we plug everything in ...
134 views

### How do I EXACTLY calculate the k-factor for metal bending?

Introduction I've recently started to work with metals and the process of bending them. There is a lot more math involved than I initially thought. All the break press operators just have a ...
49 views

### BMD of the beam joined at intersection

4 beams are supported by the column at one side, another side is jointed together at the intersection. I have assigned UDL of 20 kN/m on all the beams. 2 beams are longer (3m), 2 beams are shorter (2m)...
81 views

### How many support beams/rods needed for a firewood storage cabinet

I am building a firewood storage cabinet which should support around 100-150 kg of firewood. The cabinet is made out of wooden boards (...
79 views

### Simple cantilever beam deflection - what is the simplest way to add a damper?

I am looking at a simple cantilever beam deflection: I understand the general expression for deflection/force would be: $$y_s = \frac{Fx_s^3}{3EI}$$ $$F_p = \frac{3y_sEI}{x_s^3}$$ If you were going ...
48 views

### How does Nonlinear Viscous Damping work? In what way are Viscous Dampers typically nonlinear?

Viscoelastic materials like metal cables/wires/strings/webs/beams can be modeled with a variety of combinations of springs and dampers as described here. For example, one simple common structure to ...
192 views

### Multiple varying cross section beam with uniform loads

I have the following cantilever beam problem where I need to find the deflection of the tip at P. I tried to compute the deflection of the beam using Castignliano' s theorem as described in this ...
29 views

### Finding the Shear Center for a Beam with 1 Axis of Symmetry

I am trying to solve this problem of finding the shear center for the given beam and I have found that e = 35.94 mm, however the solution that was shared with me, had the answer of 39.17 mm. My method ...
57 views

### Can Sheet Metal Be Formed With Bends At Weld Joints?

I understand that a weld, if done properly, is stronger than the base metal. Does this mean that if you have a part that needs to be formed, the bend can be made along the weld? Or is the weld filler ...
25 views

### What is the relation between the angle of a bend along one axis and the length of a face perpendicular to that bend

Sorry if the title doesn't make sense, I just cant think of how to word it so I'm going to be using images to help. Basically I have a piece of sheet metal that I have bent along one edge to give me a ...
32 views

### Elastic thin hard material with dog nails scratch resistant

Im looking for a an elastic thin material for hinge and running surface for a dog to glue on wood (I would just use wood but i'm afraid it will splinter) It should be able to bend 45 deg with ease, ...