Questions tagged [acceleration]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
0
votes
1answer
18 views

how can i find Spectral Acceleration (Sa(T1; 5%))?

I want to do incremental dynamic analysis (IDA) for my project and for hunt and fill algorithm i need the 5% damped Spectral Acceleration at the structure’s first-mode period (Sa(T1; 5%)) . Can i find ...
3
votes
1answer
51 views

How do rollercoaster designers calculate the ideal curve?

I've been looking into rollercoaster track designs and wondered how they mathematically calculate the ideal curves to fit some specific layout without creating excessive Gs or other rider discomfort ...
1
vote
2answers
78 views

is a positive acceleration indication that velocity must be positive?

the question is clear and straight forward but when i get the velocity it should be ±√2 what i don't understand is the guide answer refusing the -ve value because acc is always +ve thank you in ...
0
votes
2answers
42 views

Effect of centripetal acceleration on angular acceleration

$a_t$ = $\frac{dv}{dt}$ = $\frac{d(r*\omega)}{dt}$ = $r $* $\alpha$. $a_c$ = r*$\omega^2$ = $\frac{v^2}{r}$ These are almost all the variables and values associated with centripetal and tangential ...
0
votes
1answer
40 views

How to get the normal acceleration

For the problem below, I tried solving it, but I don't know where I should get the value of normal acceleration, guess I was lost. And here's what I solved so far
2
votes
1answer
105 views

Dynamics of a rigid body in a system of two linear drives

I've been trying to solve the dynamics of this system for quite a while, but cannot seem to get the right answer. I've tried solving it with Lagrangian method but I am not so confident with the ...
0
votes
3answers
94 views

How to solve this Question regarding compound accelerations

So , I was trying to solve it. Then , I notice that acc of 2kg mass has 2effects. One acc from the force to left and one from the Question , it says acceleration to be up. Then , the 2kg mass would go ...
0
votes
0answers
39 views

Ride Comfort Estimation using Accelerometers

I've been trying to find established/novel methods for calculating ride comfort using accelerometers and recently I came across this paper which uses ISO 2631 standard to get an objective measure of ...
0
votes
1answer
109 views

Angular acceleration and the moment of inertia

The wheel is made from a 10-kg thin ring and four 0,5-kg slender rods. If the torsinal spring attached to the wheel's center has a stiffnes $ k = 2 N*m/rad$, so that the torque on the center of the ...
3
votes
1answer
772 views

Conversion from LSB to mg not making sense for accelerometer

I have a BMI088 and am trying to get an accelerometer reading. The data sheet and specs for Bosch Sensortec are here: The sensitivity per range is this (its a 16 bit signed integer): ± 3 g: 10920 ...
0
votes
2answers
61 views

Are there offsets in these accelerometers signals?

How you can see in the picture below, there are 3 signals from 3 piezo accelerometers placed on a oscillating 3D structure. The structure should vibrate only along the z axis (blue track), but there ...
0
votes
1answer
22 views

Why are the two acceleration considered as a1 and a2 here and find acceleration of 6kg mass?

Why are the two acceleration considered as a1 and a2 here? What is the reason for this even though the tension of both the strings are same. T is equal to 5gTcos 53 for left side and 5gTcos37 for the ...
0
votes
0answers
26 views

Vibration measurement of rotating blade

In a vibration measurement of a rotating blade, I have the following information. The vibration signal is measured using an ICP accelerometer which has the following specification Measurement range: ...
-1
votes
1answer
47 views

How to convert gyro data to extrinsic/global/world euler xyz angles?

I know that I can get gyro angles by integration, but that are not the angles I need. I need the same angles that I calculate from the accelerometer (extrinsic euler xyz angles) to apply properly a ...
0
votes
1answer
38 views

Can a mouse use acceleration to track movement?

Would it be technologically possible to use mouse momentum measurements to move a cursor on screen instead of the classic laser technology, without losing precision? This would for example allow ...
2
votes
2answers
87 views

Acceleration of spool on conveyor belt

A spool has a mass of 500 kg and a giration radius of $k_G = 1.30m$. The spool lies on the surface of a conveyor belt, the static coefficient of friction is $\mu_S=0.5$. The spool is not moving at ...
-1
votes
1answer
31 views

Euler rotations and acceleration

I have a system determined by 3 Euler angles that describe the orientation with respect to a fixed coordinate system XYZ. The angular velocioties are: $\omega_2$ (precession), $\omega_1$ (nutation) ...
1
vote
1answer
178 views

Calculate car acceleration from torque

I have data: mass = 740 kg wheel diameter = 670 mm Rw = 0,335 m power (max?) = 750 horsepower (551kW) Now I would like to calculate car acceleration when throttle ...
0
votes
0answers
25 views

How to design a method to estimate vx=speed in direction of swimming

We have a body that goes underwater (let's say a whale) with magnetometer and accelerometer data. I also have GPS, date, depth, pressure and temperature data. I want to know if there is any simple way ...
-1
votes
1answer
16 views

Construct “Modal Coordinates Time History” from transfer function and test accel-time data

I have a query regarding the calculation of the so called “Modal Participation Factor time signal” from a combination of a) transfer functions (amplitude and phase for each eigenmode) obtained from "...
2
votes
0answers
60 views

How to compare two acceleration sensors side-by-side?

I have a single axis analog capacitive acceleration sensor (from PCB Piezotronics) which is very reliable but expensive. Now I need more axis, unfortunately can not afford buying anymore. So I have ...
1
vote
0answers
27 views

How to choose order and cut-off frequency for low-pass Butterworth filter?

When using IMU data (accelerations and angular velocities), many papers use a 4th order low-pass butterworth filter with a cutoff frequency of 5 Hz. However, none of them really justify why those ...
1
vote
2answers
32 views

Order of matrices when rotating a vector

I would like to calculate the vertical velocity of a drone by integrating accelerometer data, problem is that the accelerometer measures in the frame of reference of the drone and not the the earth. ...
0
votes
2answers
78 views

How do I measure max oscillation of building using accelerometer?

For my school project, I am trying to measure the effect of a mass damper by changing the length of the string (that carries the mass), my setup is similar to the following video: https://youtu.be/...
0
votes
1answer
129 views

Minimum required rolling friction between pulley and the rope

The 40 kg weight accelerates and runs on a rope from 0 to 50 km/h in 10 seconds. I want to calculate the minimum required rolling friction that I need (acceleration without slipping) to achieve ...
0
votes
0answers
38 views

Is it possible to protect electronics on a cubesat from 100-1000g of acceleration

I am currently researching the feasibility of setting up a coilgun that launches Cubesats for a paper.
0
votes
2answers
137 views

Calcultate speed from accelerometer for runner

I hope you are well. I am writing to you because I am working on a sports project and I have a little trouble interpreting my results. we placed the accelerometer on the legof a runner and we have ...
2
votes
1answer
72 views

Robot velocities based on IMU data

I'm currently stuck on obtaining a description of the robot base velocities (xdot, ydot, thetadot) based on data obtained from 4 IMU sensors located, with an offset, on 4 pivot points. See picture ...
4
votes
1answer
943 views

Calculating gyro data from accelerometer, pitch, roll and yaw

I am currently collecting accelerometer and attitude data using smartphone sensors. Data is collected at 100Hz over 2.5 seconds. Of which there are 250 accelerometer points and 250 points representing ...
2
votes
2answers
963 views

Calculate maximum acceleration of a car from rest (optimum launch)

First disclaimer: I have a background in math, but I'm no expert in engineering or physics. This is the first question I've ever posted and I think it belongs here, but please let me know if belongs ...
0
votes
1answer
74 views

How is train speed calculated in OpenRails?

I have been playing OpenRails Train SImulator recently and I thought i made my own train(which i did), then the physics part came up. It required me to fill in a lot of parameters, like braking, ...
0
votes
1answer
33 views

Power needed to accelerate metal powder through two spinning wheels

I have a wheel which has a radius of 0.1m that needs to spin at 10000RPM. The outer surface of this wheel is pressed up against another free spinning wheel like a football or tennis ball launcher. I ...
0
votes
1answer
18 views

methods of propulsion of hydrogen plasma

What would be the best method of accelerating a continuous flow of hydrogen plasma to 300 000 m/s. I have thought about a rail gun approach but don't think this would be suitable for these speeds or ...
0
votes
1answer
104 views

Rapid acceleration and deceleration of Space X's BFR

Given that momentum is the product of speed and weight (Velocity x Weight) would rapid deceleration or acceleration in weighless space, of Space X's BFR have an impact on its passengers. I ask because ...
1
vote
0answers
24 views

Linear Guidance law into X-Y axis

Im currently writing a model for a guidance law named Maintaining Guidance law. The law looks as following: $$ a_{M} = [K_1,K_2]*[\dot{\lambda_T} ,\dot{\lambda_D}]'$$ Since im using a linear model I ...
-1
votes
1answer
104 views

Theory on tangential acceleration [closed]

b) I dont understand how to take the integration like its integral of ft from 0 to 2 pi = integral of velocity, and the integral of the first is the area under the graph= 8j and then I dont know how ...
-1
votes
3answers
149 views

4 Way Bugatti Tug of War

The reasoning for this question comes out of pure curiosity. say if there were, for example 4 bugatti veyron's ( represented by the rectangles on the diagram) all starting from the middle and all ...
5
votes
3answers
163 views

Measuring the road surface quality

First of all, excuse my little knowledge, I'm a computer programmer by trade and unfortunately have very little knowledge of physics, engineering, DSP but I'm willing to learn. I would like to ...
0
votes
1answer
49 views

How to drive a gear system to wear out fast

i am designing an experimental platform to test some 3D printed gears that i am designing. i want to test the durability and what i am looking for is a way to make them wear out fast. i will basically ...
-1
votes
2answers
109 views

Can a six-wheeled F1 car have a better acceleration profile than a typical F1 car? [closed]

I wonder whether the P34 died too soon. Basically, I'm wondering whether the additional pair of wheels could have conferred the car any advantages that, if solved, would have given it an advantage ...
4
votes
1answer
511 views

Optimising driving speed of stepper motor for maximum acceleration by trial and error

I'm writing code for a microcontroller that will ramp up the speed of a stepper motor as quickly as possible, for a jig that I'm building, that moves a workpiece from one position to another along a ...