2
$\begingroup$

So, I must do the following conversion from my engineering textbook:

$0.155 \frac{m^2 * ^{\circ} C}{W}$ to $\frac{^{\circ}F * ft^2 * hr}{Btu}$

I can get as far as:

$0.155 \frac{m^2 * ^{\circ} C}{W} * (\frac{1 ft}{0.3048 m})^{2} * \frac{1 W}{3.4123 \frac{Btu}{h}} = .39108 \frac{ft^2 * ^{\circ}C *hr}{Btu}$, but I can't figure out how to do the final conversion properly, which involves converting that from

$.39108 \frac{ft^2 * ^{\circ}C *hr}{Btu}$ to $\frac{^{\circ}F * ft^2 * hr}{Btu}$.

$\endgroup$
7
  • $\begingroup$ Welcome to engineering.SE! Can you confirm the 0.39108? Just following your calculation I would get 0.4889... $\endgroup$
    – idkfa
    Oct 2, 2015 at 0:53
  • 1
    $\begingroup$ So you have one unit left to convert. Convert that unit... $\endgroup$
    – hazzey
    Oct 2, 2015 at 1:01
  • 1
    $\begingroup$ @hazzey. The problem for me is that I'm not sure how converting temperature inside of a compound unit works, due to the fact that I'm not familiar with any one number that I can multiply a compound unit containing degrees Celsius to get degrees Fahrenheit. I don't know if I can simply use a stretch factor of $\frac{9}{5}$ as a conversion factor, or if I should plug it my final result into $F = \frac{9*C}{5} + 32$. $\endgroup$ Oct 2, 2015 at 1:35
  • $\begingroup$ @idkfa, Could you tell me what you used to get that number? $\endgroup$ Oct 2, 2015 at 1:36
  • 2
    $\begingroup$ I think this question is more valuable than it may seem at first; the conversion of temperature differences vs. specific temperatures seems to befuddle many people, including those in the sciences. I remember taking a final exam in my last semester of engineering school, where in one question it was necessary to do a temperature difference conversion. So many students were confused by this that the instructor had to stop the test and spell it out for them. These were people about to receive their B.S. in chemical engineering, by the way. $\endgroup$
    – Carlton
    Oct 2, 2015 at 13:33

1 Answer 1

3
$\begingroup$

I suspect you're converting a value of thermal resistance, which means that the temperature units represent a temperature difference, rather than specific values of temperature. In this case, the constant 32 drops out of the conversion and you would just just multiply by $\frac{1.8^\circ F}{^\circ C}$. Also, I agree with idkfa that your math is wrong in the conversion of power and area. I get 0.489.

$\endgroup$
0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.