I am modelling transitional fluid flow over a flat plate, and investigating the effects of free stream velocity on boundary layer thickness. From what we have been told, increasing free stream velocity should decrease boundary layer thickness. The critical distance should also move towards the front of the plate with increasing free stream velocity, which holds true for all free stream velocities tested.
In my Excel model, the assumption for boundary layer thickness holds true for the laminar region. However, past the critical distance, when flow is turbulent this does not hold true.
I have modelled a flat plate 2m long by 0.2m wide. Free stream velocities used are 0.7 m/s, 1.05 m/s, and 1.4 m/s. Using water, with density = 1000 kg/m^3 and Dynamic Viscosity = 0.001 kg m^-1 s^-1.
Using the Blausius equation and the 1/7th Power Law the same boundary layer thickness is found at the critical distance, indicating the modelling is done correctly.
I just cannot understand why the boundary layer thickness is not lower in the turbulent region for greater free stream velocities. Any help in understanding would be very much appreicated!
Below I have included an image of the graph obtained.