I'm a beginner in chemical engineering so apologies in advance if this question is very basic!

The Problem

You are required to measure the mass and volumetric flow rate of a slurry stream. The slurry contains only water and solids. You take a bucket and stop watch and measure the time taken to fill the bucket. From these measurements, the following information is obtained.

  • The stream fills a 10 litre bucket in 13.5s.

  • A sample of the slurry weighing 767g is filtered and dried. The dry solids weigh 148g. 􏰀

  • The density of the solids only is known to be 3200kg/m3.

    TASK: Calculate the mass flow rate of the slurry stream.

My Attempt

  1. I converted the rate at which the slurry filled the bucket to m3/s.

10L / 13.5s = 0.01m3/13.5s = 0.000741 m3/s

  1. I calculated the density of the slurry by adding together the relative densities of its dry solids and its water.

density of slurry = (ratio of dry solids:slurry stream)(density of dry solids) + (ratio of water:slurry stream)(density of water) =(0.148/0.767)(3200 kg/m3) + (0.619/0.767)(1000kg/m3) = (0.193)(3200 kg/m3) + (0.807)(1000 kg/m3) = 1424.6 kg/m3

  1. I plugged in the respective values into the equation mass flow rate = density * volumetric flow rate.

mass flow rate = 1424.6 kg/m3 * 0.000741 m3/s = 1.055 kg/s

Correct Answer

According to the answer key, the answer is supposed to be 0.854 kg/s.

I'm not sure where I went wrong.


1 Answer 1


It's the density calculation you have. You're almost there! This site explains it pretty well:


Density of slurry=1/[(ratio of solid/mixture masses)/(solid density)+(ratio of liquid/mixture masses)/(liquid density)]

Density of slurry=1/[0.148 kg/0.767 kg /(3200 kg/m^3) +0.619 kg/0.767 kg/(1000 kg/m^3)]

I hope this makes some sense!


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.