I have to drive several 12V servo motors. So I wanna to get 12V PWM Controller (12V Logic Controller). I have MCU as Atmel SAM3X8E arduino due board. It has 5V PWM outs. Is there any Controller IC available for this task?
$\begingroup$
$\endgroup$
3
-
$\begingroup$ You might want to take a look at Motor Driver board: limited current for additional ideas. $\endgroup$– DiaperHandsAug 29, 2019 at 13:42
-
$\begingroup$ Edit your question with a datasheet. The term servo motor means entirely different things in the hobbyist market than it does in the industrial market; advise applicable to one type may let the smoke out of the other. $\endgroup$– TimWescottAug 29, 2019 at 14:59
-
$\begingroup$ Would need more information on the servo but I would use a MOSFET. $\endgroup$– DrBwtsAug 29, 2019 at 19:45
Add a comment
|
1 Answer
$\begingroup$
$\endgroup$
Take a look at ARDUINO MOTOR SHIELD REV3. Here is what it looks like. If you have several motors then might have to stack several motor shields.
answered Aug 29, 2019 at 11:09