0
$\begingroup$

I am installing shades on a section of deck. The shade will be made of sections of fabric (which will let some wind through), but I assume a solid section. Dimensions are 3.5ft*4ft = 14ft^2 = 1.3m^2

I will put the shades on and off, but I want to make sure it won't break if there is a sudden gust of wind. Suppose a 60 mph wind gust = 26.8 m/s and 1.2kg/m^3 air density. This leads to 561.4N of force. (I know the 4X4 red cedar post will hold. I know the fabric will hold. The seam may break, but that's an easy fix.)

The shades will be supported by 2 tubes (beams), one on top, one at bottom. So, I assume an even load. I also assume the load is even on the whole length on the tube. So, 1 tube of 1.066 meter should support roughly 281 N.

I was able to find how to compute the maximum moment of 37.43 Nm.

This is where I can't finish my calculations. Will a (generic) 1in aluminum tube (1/16in thickness) I find at the store enough? I found the tensile strength of aluminum is between 33000 to 76000. So I assume the generic tube I find at the store will be the lowest one at 33000.

$\endgroup$
1
$\begingroup$

I just assume your calculations are correct up to just the bending moment strength of aluminum tube.

$$ \sigma_x= \frac{M}{S} $$

$$ S_{alum\ tube}= \frac{\pi*(D^4-d^4)}{32D}= \frac{\pi*(1-0.7724)}{32} =0.02233\ in^3 =365mm^3$$

$$ \sigma = \frac{37430}{365}= 102.5 $$ please check my numbers.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.