I have two disks to bolt with. 4 centrally located holes on each with Pitch circle diameter P and one hole at center of disc. If standard bolt diameter is B +/- b, what should be each hole diameter if tolerance of drilling hole is +/- h.
For the load rating I got M6 bolts. Their dimensions are 5.85+/- 0.1 mm. And PCD is 10 cm, and I have to bolt it via 4 bolts symmetrically placed and one in center. Drilling of holes on pitch circle is of tolerance 0.5 mm, while central hole tolerance is 0.1 mm. Now, what should be the hole diameters?, so as all four bolts get into and proper fitment occurs.