Although ink waste (mixed colors of different inks for printing) is 90% water, separating the inks appears to be problematic. We have tried membranes, RO, electrolysis, boiling, and solidifying with kitty litter. Membranes do not trap the dyes, electrolysis is slow and expensive, boiling is expensive and messy, and litter makes too much waste. I would like to separate out the water and decimate (reduce by 90%) the waste. Any other process ideas? I have worked on precipitating the ink but I am not much of a chemist and there are all kinds of different components.
Low pressure desalination is a known technique to avoid high temperatures, the same problem that appears to hinder you in boiling.
I wouldn't aim for a single process, though. As you noted, boiling will concentrate the result and give you sticky solution to work with. At that point you may want to switch to that litter-based solution - most of your intial volume will have been boiled off as pretty clean water vapor. (If your ink contains alcohols, they'll boil off preferentially and can be condensed out before the water vapor.)