Timeline for How to mount a load-bearing gear shaft through a wooden plate
Current License: CC BY-SA 3.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 13, 2017 at 12:51 | history | edited | CommunityBot |
replaced http://engineering.stackexchange.com/ with https://engineering.stackexchange.com/
|
|
| Apr 13, 2015 at 20:20 | comment | added | etf | I will definitely use screws on shaft collar :) Or I will maybe use two shaft collars, one above other :) | |
| Apr 13, 2015 at 20:06 | comment | added | Ethan48 | Also be aware that some shafts are hardened and/or made out of very high strength steel, and welding to them can be both difficult, and make the shaft softer in the area of the weld. | |
| Apr 13, 2015 at 19:37 | comment | added | Trevor Archibald | Welding definitely will be the strongest way to attach it, but you will run the risk of deforming the material when you heat it up, which can be especially disastrous on a power transfer shaft. | |
| Apr 13, 2015 at 19:37 | comment | added | etf | Thanks a lot for reply! I will probably use shaft collar as Ethan48 suggested to keep shaft from falling down. It would be even better to weld it on shaft than to use screws, right? | |
| Apr 13, 2015 at 19:04 | history | answered | Trevor Archibald | CC BY-SA 3.0 |