How can I separate gear oil from metal shavings coming from a gear boxto weigh worn metal?

I have tested a gear box for many hours. Where the gears are made of a hardened steel alloy and the housing is 7000 series aluminum. Now I drained the gear box of its gear oil and I need to weight the metal shavings in that oil. So I can put in fresh oil and test the gear box for a couple more hours. And then do the test all over again. Can anyone give me a good idea as to how I can accurately separate the oil with out losing the tiny pieces of metal? I thought I could filter the oil through coffee filters then give it a thorough cleaning with hot water and soap, then drying it in the oven. Can anyone tell me if this is a good idea or can you come up with a better one? Thank you in advance.

How can I separate gear oil from metal shavings coming from a gear box

I have tested a gear box for many hours. Where the gears are made of a hardened steel alloy and the housing is 7000 series aluminum. Now I drained the gear box of its gear oil and I need to weight the metal shavings in that oil. So I can put in fresh oil and test the gear box for a couple more hours. And then do the test all over again. Can anyone give me a good idea as to how I can accurately separate the oil with out losing the tiny pieces of metal? I thought I could filter the oil through coffee filters then give it a thorough cleaning with hot water and soap, then drying it in the oven. Can anyone tell me if this is a good idea or can you come up with a better one? Thank you in advance.

How can I separate gear oil from metal shavings to weigh worn metal?

I have tested a gear box for many hours. Where the gears are made of a hardened steel alloy and the housing is 7000 series aluminum. Now I drained the gear box of its gear oil and I need to weight the metal shavings in that oil. So I can put in fresh oil and test the gear box for a couple more hours. And then do the test all over again. Can anyone give me a good idea as to how I can accurately separate the oil with out losing the tiny pieces of metal? I thought I could filter the oil through coffee filters then give it a thorough cleaning with hot water and soap, then drying it in the oven. Can anyone tell me if this is a good idea or can you come up with a better one?

edited body
Source Link

I have tested a gear box for many hours. Where the gears are made of a hardened steel alloy and the housing is 60007000 series aluminum. Now I drained the gear box of its gear oil and I need to weight the metal shavings in that oil. So I can put in fresh oil and test the gear box for a couple more hours. And then do the test all over again. Can anyone give me a good idea as to how I can accurately separate the oil with out losing the tiny pieces of metal? I thought I could filter the oil through coffee filters then give it a thorough cleaning with hot water and soap, then drying it in the oven. Can anyone tell me if this is a good idea or can you come up with a better one? Thank you in advance.

I have tested a gear box for many hours. Where the gears are made of a hardened steel alloy and the housing is 6000 series aluminum. Now I drained the gear box of its gear oil and I need to weight the metal shavings in that oil. So I can put in fresh oil and test the gear box for a couple more hours. And then do the test all over again. Can anyone give me a good idea as to how I can accurately separate the oil with out losing the tiny pieces of metal? I thought I could filter the oil through coffee filters then give it a thorough cleaning with hot water and soap, then drying it in the oven. Can anyone tell me if this is a good idea or can you come up with a better one? Thank you in advance.

I have tested a gear box for many hours. Where the gears are made of a hardened steel alloy and the housing is 7000 series aluminum. Now I drained the gear box of its gear oil and I need to weight the metal shavings in that oil. So I can put in fresh oil and test the gear box for a couple more hours. And then do the test all over again. Can anyone give me a good idea as to how I can accurately separate the oil with out losing the tiny pieces of metal? I thought I could filter the oil through coffee filters then give it a thorough cleaning with hot water and soap, then drying it in the oven. Can anyone tell me if this is a good idea or can you come up with a better one? Thank you in advance.

added 92 characters in body
Source Link

I have tested a gear box for many hours. Where the gears are made of a hardened steel alloy and the housing is 6000 series aluminum. Now I drained the gear box of its gear oil and I need to weight the metal shavings in that oil. So I can put in fresh oil and test the gear box for a couple more hours. And then do the test all over again. Can anyone give me a good idea as to how I can accurately separate the oil with out losing the tiny pieces of metal? I thought I could filter the oil through coffee filters then give it a thorough cleaning with hot water and soap, then drying it in the oven. Can anyone tell me if this is a good idea or can you come up with a better one? Thank you in advance.

I have tested a gear box for many hours. Now I drained the gear box of its gear oil and I need to weight the metal shavings in that oil. So I can put in fresh oil and test the gear box for a couple more hours. And then do the test all over again. Can anyone give me a good idea as to how I can accurately separate the oil with out losing the tiny pieces of metal? I thought I could filter the oil through coffee filters then give it a thorough cleaning with hot water and soap, then drying it in the oven. Can anyone tell me if this is a good idea or can you come up with a better one? Thank you in advance.

I have tested a gear box for many hours. Where the gears are made of a hardened steel alloy and the housing is 6000 series aluminum. Now I drained the gear box of its gear oil and I need to weight the metal shavings in that oil. So I can put in fresh oil and test the gear box for a couple more hours. And then do the test all over again. Can anyone give me a good idea as to how I can accurately separate the oil with out losing the tiny pieces of metal? I thought I could filter the oil through coffee filters then give it a thorough cleaning with hot water and soap, then drying it in the oven. Can anyone tell me if this is a good idea or can you come up with a better one? Thank you in advance.

Source Link
Loading