Engineering Beta

Editor

 Editor
First edit.
Awarded 3634 times.
Does thread angle modulate ease of (rotational?) penetration in a screw?
Awarded 7 hours ago
How do 3 blade turbines come so close to the Betz Limit?
Awarded 8 hours ago
Is the calculated shear strain in a beam, engineering strain or tensorial strain?
Awarded 2 days ago
Why do modern phone cameras apparently have three or even more different camera lenses in almost the same spot?
Awarded 2 days ago
(post deleted or otherwise unavailable)
Awarded Jul 23 at 17:27
Will this straw feeder work?
Awarded Jul 22 at 17:50
Heat transfer Calculation for heating polypropylene plastic Nano tubes
Awarded Jul 22 at 10:40
(post deleted or otherwise unavailable)
Awarded Jul 22 at 7:16
Which material, which geometry, which manufacturer? [closed]
Awarded Jul 22 at 6:57
Is there a formula that relates the two angles in a crank rocker?
Awarded Jul 21 at 18:42
Compute deformation response history from ground motion
Awarded Jul 21 at 14:18
Wind turbines are plastic. How does that “work”? [closed]
Awarded Jul 21 at 4:09
Reverse Suspension Spring
Awarded Jul 20 at 10:50
Effect of conductivity on time constant
Awarded Jul 20 at 5:50
Finding Safety Factor for Plastic Snap Fit Cantilever
Awarded Jul 20 at 3:42
Is there a maximum life for things made out of stainless steel or cast iron?
Awarded Jul 20 at 2:20
How to Construct a Primary Auxiliary View given that an oblique surface with 6 sides
Awarded Jul 20 at 2:15
How to calculate the volume of air that will cool steel?
Awarded Jul 19 at 22:03
Why are there no propane refrigerator air-conditioning units that run on solar heat?
Awarded Jul 19 at 21:26
Gear Oil HP 85w-140 vs HP-140
Awarded Jul 17 at 20:47
Where to acquire / create LED optics
Awarded Jul 17 at 18:25
(post deleted or otherwise unavailable)
Awarded Jul 16 at 18:56
How to simulate open and close and control valve using a simple controller
Awarded Jul 16 at 5:42
Does ASME follow the ANSI standard, the ISO standard, or neither (both work)?
Awarded Jul 16 at 3:08
How do I study the frequency response of a physical system with Arduino?
Awarded Jul 15 at 18:45
(post deleted or otherwise unavailable)
Awarded Jul 15 at 14:05
How to get the performance index ISE and IAE for a Matlab-Simulink designed Line Follower Robot with PID control?
Awarded Jul 15 at 13:25
Balancing suction air flow at different areas on pipe
Awarded Jul 14 at 10:10
Why don't motorcycles have as good a turning radius as bicycles?
Awarded Jul 13 at 16:48
Parallel beam load cells, force transfer and maximum load
Awarded Jul 12 at 23:32
Copper pipe for brine water block ice system
Awarded Jul 12 at 22:22
Fastening a Nut on threaded rod from the middle
Awarded Jul 12 at 20:04
Why don't motorcycles have as good a turning radius as bicycles?
Awarded Jul 12 at 15:04
How much power does it take to supply a laser which delivers 100 watts? [closed]
Awarded Jul 12 at 14:40
On rectangular section beam properties of plate stiffeners
Awarded Jul 10 at 20:30
(post deleted or otherwise unavailable)
Awarded Jul 8 at 23:56
(post deleted or otherwise unavailable)
Awarded Jul 8 at 12:55
I would like to cut out arcs of the circumference of a cross section of PVC pipe so the arcs are precisely 60 degrees. How would I do this?
Awarded Jul 8 at 10:05
Homemade metal cover for Arduino temperature sensor
Awarded Jul 8 at 9:07
magnetic levitated tower - magnetic fields and tensile strengths of materials [closed]
Awarded Jul 7 at 22:57
Is a no-moving-parts air pressure transformer possible?
Awarded Jul 7 at 17:26
(post deleted or otherwise unavailable)
Awarded Jul 7 at 16:42
(post deleted or otherwise unavailable)
Awarded Jul 7 at 0:45
Disposition of the generators on the shipwrecked Costa Concordia
Awarded Jul 6 at 19:31
What's the most efficient air compressor to reliably deliver up to 15 litres per second at 10 bar? [closed]
Awarded Jul 6 at 10:47
what are some books/academic journals which I could read on renewable energy/technology? [closed]
Awarded Jul 6 at 7:57
How to calculate power line loss with ohm's law and power equation?
Awarded Jul 6 at 1:36
Calculating discharge from a reservoir as the head of water decreases
Awarded Jul 5 at 16:27
(post deleted or otherwise unavailable)
Awarded Jul 5 at 3:50
How to send true digital data in discrete values?
Awarded Jul 4 at 22:22
Solution to wave equation in a stretched string with one end fixed and the other subject to periodic input
Awarded Jul 1 at 16:26
Raise/Lower 350lb Sawmill Head 12v Motor Specs
Awarded Jul 1 at 4:52
What are some obstacles/issues you face while working in industry? [closed]
Awarded Jun 29 at 20:36
Will a motor with 1,16 Nm rotate a 50 mm gear moving about 12 kg
Awarded Jun 29 at 19:05
Analytical solution for the 1D convection-diffusion equation
Awarded Jun 29 at 15:55
(post deleted or otherwise unavailable)
Awarded Jun 29 at 11:17
How much deflection can/should I accept with Aluminum Extrusions?
Awarded Jun 29 at 6:11
(post deleted or otherwise unavailable)
Awarded Jun 28 at 15:41
Can a beam be too short to experience bending stress?
Awarded Jun 28 at 14:55
Balance between technical and philosophical training [closed]
Awarded Jun 28 at 12:47
1
2 3 4 5
…
61

Your privacy

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.