2
$\begingroup$

I have a circular puck of stainless steel that is 9.5 mm in diameter. In the center, there is already a 5 um pinhole. My objective is to basically cut the steel along the dotted line, approximately 0.5 mm from the pinhole. Can you advise on what techniques to can make this cut precisely?

Circular sheet of steel with 5 um pinhole

The reason I want to do this is to be able to align two of these so that I can have 2 pinholes that are ~1 mm apart from one another, as in the following image.

Two pinholes adjacent to one another

Improve this question
$\endgroup$
4
  • $\begingroup$ You say "centered line", but I'm seeing from the image that the line is actually off-center, correct? Also, what is your definition of "high precision"? $\endgroup$
    – Wasabi ♦
    Mar 14, 2016 at 16:34
  • $\begingroup$ @Wasabi Sorry I meant to say "dotted" line. I edited the question to reflect that. My definition of high precision is that I want it to be cut 0.5mm += 0.25mm from the pinhole. In other words, as long as the pinhole is intact and I can align two pinholes together I am happy. :) $\endgroup$
    – ArKi
    Mar 14, 2016 at 16:44
  • $\begingroup$ Do you have any restrictions on the type of machinery you can use to perform the cut? Because if not, a machine shop has plenty of tools to do the cut precisely enough as outlined the the answers. $\endgroup$
    – Robin
    Mar 16, 2016 at 16:16
  • $\begingroup$ I'm puzzled as to how the poster got a 5 μm hole, that is 1000 μm long, in stainless? Even laser drill will not give that. $\endgroup$
    – PcMan
    Jun 9, 2021 at 7:39

5 Answers 5

Reset to default
4
$\begingroup$

Calling a small disc that is 9.5 mm DIA and 1.0 mm thick "a thin sheet of steel" is a bit of a stretch.

Any machinist would simply clamp the disc in a suitable vise and mill away the unwanted part. Precision would be a couple orders of magnitude better than your requirement.

If you have patience and only need a small number of them done, a pair of pliers and a grinding wheel could accomplish the same thing.

Improve this answer
$\endgroup$
1
  • $\begingroup$ Ditto vise and coarse/fine files, probably faster than you could set up the mill. $\endgroup$
    – user_1818839
    Mar 15, 2016 at 18:07
3
$\begingroup$

The tool I would use is metal cutting scissors (or Snips). It's remarkably easy to get a straight cut with these after a little practice. I would first make a cut far from the line (somewhere in the area you're going to discard), to get a feeling for a particular tool cutting steel of a particular thickness.

With some experience it is possible to cut as close as 1mm to the line, which reduces the amount grinding work needed.

Improve this answer
$\endgroup$
1
  • $\begingroup$ but it does the job but seems to create a big problem: you end up with an bended sheet of metal youtube.com/watch?v=BO3O5OBXIks (don't know if it's avoidable, or if there is a way to fix it) $\endgroup$
    – JinSnow
    Sep 15, 2019 at 13:29
2
$\begingroup$

Probably the simplest way is to cut it a few mm oversized and grind or file off the excess.

Improve this answer
$\endgroup$
1
$\begingroup$

I would say that 0.25mm is not very difficult to do.

You can use Water jet cutter to be really accurate or if you don't have this possibility, you can simply use a mill or CNC with specific drill.

Improve this answer
$\endgroup$
0
$\begingroup$

CNC Milling should be precise enough (0.01 millimeter accuracy).

Improve this answer
$\endgroup$
1
  • $\begingroup$ Do you have any backup documentation to support this? Also, I assume that CNC accuracy depends on the quality of the machine. $\endgroup$
    – grfrazee
    Mar 19, 2016 at 16:08

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.